Meet the paper polyether defoamer - Rickmanchemical.com

 Wastewater discharged during the production process of the paper industry. Paper industry wastewater can be divided into sulfate pulp wastewater and sulfite pulp wastewater. Among them, the waste water discharged from the pulp process is the most serious pollution. What's more, a large number of foams will be generated in the treatment process, paper wastewater will contain a large number of impurities and chemical additives is the cause of the foam. Many paper manufacturers in order to eliminate such foam will use paper polyether defoamer for treatment.

Paper polyether defoamer specifically designed for the paper industry in the process of paper and foam and the design of the white water has a very anti-foaming effect, can quickly remove the fibres entrained between the fine bubbles, remove the foam floating on the surface of the pulp, can be dissolved in the air within the pulp, and at the same time to remove the surface of the water bubbles, to remove the bubble impact on the process, to avoid the formation of holes, to reduce the breakage of the paper, will not make the pulp tank overflowing to ensure that the fibre and the wet part of the Loss of chemicals, paper has a better uniformity, the quality has been improved.

Advantages of papermaking polyether defoamer:
1. Fast defoaming speed, it is the product of technological improvements in the paper industry.
2. Good dispersion, dynamic defoaming, no silicon, eliminating the need for mechanical defoaming methods, can save costs.
3. Lasting foam suppression, no longer worry about due to air bubbles.

Paper polyether defoamer is generally made by multi-component compounding. The performance of the main foam can be enhanced by the compounding of surfactants. Whether an active is suitable for defoaming depends on its application conditions. For example, stearic acid is an antifoam agent under acidic conditions, while it is a foaming agent under alkaline conditions; it is effective at low temperatures, while it will be ineffective at high temperatures.

Antifoam agent to add the amount of general use of two antifoam agents than a higher content of an antifoam agent is more economical and effective, in the parts farther apart from each other to add. For example, one defoamer is added before the beater and the other is added in the headbox.

Click on the related products links：RK-700P（High Effective Fermentation Antifoam）/ RK-800P（High Cost-effective Defoaming Agent For Concrete）