KSPOWER Power Adapter Plug - keysuntech.com

 AC power cord plugs and sockets connect electric equipment to the alternating current (AC) mains electricity DC power supply in buildings and at other sites. Electrical AC plugs and sockets differ from one another in voltage and current rating, shape, size, and connector type. Different standard systems of plugs and sockets are used around the world.

AC plug is the movable or fixed connector attached to an switching power supply. KSPOWER’s ac dc adapter features universal ac input 100-240v, accept various AC plugs for different countries choose.

Some plugs have female contacts that are used only for an earth ground connection. Some plugs have built-in fuses for safety. The assigned IEC appliance class is governed by the requirement for earthing or equivalent protection. Class I power units requires an earth wire in the plug and socket, while Class II power units is unearthed and protects the user with double insulation. KSPOWER’s desktop power adapter is designed of three standard AC inlets IEC320-C8(without earth pin), IEC320-C14 and IEC320-C6(with earth pin) in order to meet the Class I and Class II power requirements.

Different countries/regions vary in type of AC plug and voltage, you can refer to the table below for the information of the AC plug at the power adaptor you need.

评论

发表评论

此博客中的热门博文

The Type Of Punch And Force Feeder In Tablet Press Machine

  ***  The type of punch 1. The white material above the mold is polyunsaturate, which can prevent the mold, such as pressed sheet candy material. 2. Gold mold is titanium plated, this is suitable for pressed metal powder by tablet making machine. ***Type of forced feeder: 1.closed forced feeder in  tablet press machine  and open forced feeder are generally more suitable for high-speed press, and is a particle type of material. 2.Open forced feeder of tablet press machine, which is more suitable for dry powder, such as disinfection tablets, washing tablets of this type. Role of the forced feeder: One is to solve the material liquidity problem, if the material liquidity is poor, the forced feeder must be used. Second, when the pressure and filling volume is unstable, loose pieces and fragments are more, and the pressure out of the tablet above the pay more powder, with a forced feeder can also solve this problem. Does the bubbling tablet need a forced feeder? This can not be generalized
阅读全文

The use of T-Slot milling cutter | Xmystool.com

图片
T-Slot Cutters  are designed for milling T-slots into different materials. High Speed Steel T-Slot Cutters are designed for milling T-slots into tables and beds of machine tools and similar applications where a good surface finish is required. A vertical slot must be cut first so that neck and shank may enter the cut. T-Slot End Mill is welded with carbide teeth and suitable for the slot milling mainly for milling the workpiece of T-shaped slot or groove of side surface. Staggered Tooth T-Slot End Mill (Chidori Tooth) processing load will be lower than Straight Tooth T-Slot End Mill, as well as more effectively to break and release chip to reduce processing obstruction. Dovetail End Mill is suitable for milling the angle in the groove and clearing the chip. Xiamen Yushang  is a professional supplier in China with 10 years experience devoted to producing kinds of  high quality cutting tools,accept custom service,OEM/ODM are welcome.If you have any sample or drawing,can contact  sales02@
阅读全文