Why the anti-static floor installation need to lay copper foil?
Anti-static floor is also called conductive floor. The static electricity and charged ions formed by friction in the computer room will attract dust in the air, which will cause corresponding interference and harm to the body in the computer room, electronic workshop and other departments.
Conductive floor means that the floor is conductive, and the floor contains conductive fibers.
The anti-static floor needs to be covered with a layer of copper foil before construction. Static electricity enters the ground, so that the floor has no static ions, and the anti-static floor should be paved with conductive glue.
Copper foil has good conductivity and discharge static electricity in the computer room, and is used as a conductive material in the computer room
The copper foil is usually paved with 0.05mm, and the size of 10mm*50m. If the copper foil is too thin, it is easy to be torn off during the construction process. If it is too thick, more paint is needed to smooth the copper foil. Adopt well-shaped paving, the interval can be determined according to the actual situation.
After the copper foil paving is completed, install more than two grounding ports in an area of 600 square meters, and use copper wire and copper foil for welding to make the electrostatic energy guide to the outdoors. Please pay attention to details in the construction process, which determine the quality.
评论
发表评论