Turbocharger Installation Guide - Refoneturbo.com

 Turbocharger Installation Guide

Steps to proper turbo installation:
• Change new recommended oil & air filters.
• Change recommended engine oil.
• Pre-oil the turbo oil inlet.
• Change new oil inlet pipes or flush the oil inlet pipes to remove flakes or carbon deposits.
• Ensure oil supply of at least 0.5 kgf/m² or 7 psi within 3 seconds of 1st engine start(if possible, use oil gauge to measure).
• Mount turbine inlet to engine manifold.
• Attach oil inlet pipe to turbo and crank the engine a few times until oil flows out of theturbo oil drain. Then attach the oil drain pipe.
• Connect remaining air piping hose.
• Ensure that all bolts, screws & nuts are tightened.

Pay Attention:

• Do not let foreign objects (screws, bolts, metal fragments, tools)enter ducts.
• Ensure that suitable gasket/metal flange are used for the turbine inlet, oil inlet and oil outlet. Do not use 'glue' gasket.
• Do not handle the turbo via the waste gate actuator rod or boost hose.
After the installation:
• To test, crank the engine for 10 – 15 seconds to prime oil feed without starting the engine.
• Start the engine and let it idle for 3 to 4 minutesto allow for proper inspection of oil, gas and air leakage.

评论

此博客中的热门博文

What are the functions and usage of tea tree essential oil?

Reveal the skin care glass packaging plating process

Which nanomaterials have different crystal forms