What should we pay attention to when extruding industrial aluminum profiles?

 Industrial aluminum profile is an alloy material with aluminum as the main component. Aluminum rods are melted and extruded to obtain aluminum materials with different cross-sectional shapes. However, the proportion of the added alloy is different. The mechanical properties of the industrial aluminum profiles produced are The application areas are also different. So what should we need to pay attention to when extruding industrial aluminum profiles?


1. Check the quality of every 3-5 aluminum profiles, which can reduce the rate of defective products.


2. Before squeezing, you need to check the center hole to see if the squeezing rod is in the center. Test the machine before starting to ensure that the machine can operate normally.


3. The machine will generate waste heat when squeezing. Check the oil temperature frequently to avoid fire or malfunction.

4.check the correctness of the mold before extrusion, and pay attention to safety when installing the mold to prevent the mold from falling off and hurting people.


industrial aluminum extrusion profile

评论

发表评论

此博客中的热门博文

The use of T-Slot milling cutter | Xmystool.com

图片
T-Slot Cutters  are designed for milling T-slots into different materials. High Speed Steel T-Slot Cutters are designed for milling T-slots into tables and beds of machine tools and similar applications where a good surface finish is required. A vertical slot must be cut first so that neck and shank may enter the cut. T-Slot End Mill is welded with carbide teeth and suitable for the slot milling mainly for milling the workpiece of T-shaped slot or groove of side surface. Staggered Tooth T-Slot End Mill (Chidori Tooth) processing load will be lower than Straight Tooth T-Slot End Mill, as well as more effectively to break and release chip to reduce processing obstruction. Dovetail End Mill is suitable for milling the angle in the groove and clearing the chip. Xiamen Yushang  is a professional supplier in China with 10 years experience devoted to producing kinds of  high quality cutting tools,accept custom service,OEM/ODM are welcome.If you have any sample or drawing,can contact  sales02@
阅读全文